Q35 Turntable machine

Product characteristics

1.The rotary table type shot blasting machine is mainly composed of the chamber, the turntable, the transmission system, the separator, the hoist, the shot conveying device, the shot blasting device and so on.

2.Driving the scraper to rotate through the transmission system, the shot sand is sent to the lower part of the hoist through the flow shot tube, and then separated by the separator mentioned by the hoist. The intact shot is used continuously by the transport shot tube and the gate, and the broken shot and dust are respectively entered into other corresponding pipes for secondary separation.

3. The transmission mechanism of the rotary table type shot blasting machine is driven by the cycloid pin wheel reducer, and friction transmission occurs with the turntable through a clutch mechanism to make the turntable rotate smoothly.When the work piece is turned out of the outdoor, it can be used for directly turning the adjusted and cleaned work piece;The clutch handle can also be pulled at any time according to the difference of the workpiece to be cleaned and the difficulty of loading and unloading and turning the workpiece, so as to separate the friction wheel from the turntable.

Scope of application

This machine is mainly suitable for the surface cleaning of the flat and thin wall parts which are afraid of collision after casting and forging and heat treatment. It can remove the adhesion sand, oxide scale and other attachments on the surface of the workpiece, and obtain a certain roughness of the bright surface. It can also be used to strengthen the surface of some gears and leaf springs.

Technical parameter